I can see ONLY 24 tapes in my SL48 Tape Library in RHEL 5.10
I have a SL48 Tape Library connected to my RHEL 5.10 x86_64 bit Server using parallel SCSI. My Server detect the library tape, but I can see only 24 of 48 tapes. [root@backup ~]# cat...
View ArticleRe: hpacucli on Ubuntu 14.04 trusty
Thanks, but for me it still doesn't work.I ran the Firmware upgrade DVD which updated P420i Controller Firmware from 4.68 to 5.22 and installed hpacucli 9.40.1-1 via the deb file. Still got the same...
View Articlehpacucli: Application Upgrade Required
Hello, Just installed a new DL380 G8 box with Ubuntu 12.04, but can't use the command line utils to configure the P420i array: Product Name: ProLiant DL380p Gen8Model:...
View ArticleRe: which one is best Quorum disk or Fencing in Redhat Linux
So, based on what you saying here, GFS system can't solve the split-brain problem? Can we use the distrubuted locker manager (DLM) to control the writing and reading process you mentioned?Is possible...
View ArticleRe: which one is best Quorum disk or Fencing in Redhat Linux
Thank for your valuable information. I have question what is the difference between delay and post_join_delay ? both are same ?
View ArticleRe: How to find the local disks and SAN disks in linux
You can use the lsblk command to display blocks in structurewise..Note: If command not found, you can find it. => yum provides */lsblk
View ArticleRe: hpacucli on Ubuntu 14.04 trusty
Im getting the same error on 12.04, but for me the problem is with SSD drive installed on the server. When removing the SSD the probelm solved.That's a problem becouse half of our servers have SSD and...
View ArticleC Programming Language: How To Pull In Information From The System?
Hello Everyone; I want to run the <apm> command, from withing a C program, and get the program to receive the output - so that I can display it in an xsession (window) on my screen. I've used the...
View ArticleRe: C: How to pull in info from the system?
The correct function is popen(3) with the "r" parm. Or you could use pipe(2) with fork(2)/exec(2).And example of the reverse popen(3) is...
View ArticleRe: C: How to pull in info from the system?
Hello Dennis; All I needed was the <popen> function. Worked as expected. Now I can re-write all the programs that I wrote that use [system abcdefg >> output] and then do an <open> of...
View ArticleRe: C: How to pull in info from the system?
>Thank you for your help! If the posts were helpful, please click on the kudos stars, both here and at the link.
View ArticleRHEL Bonding mode =1 Question
On a RHEL5 machine we have the bond1 with 2 interfaces eth3 and eth8 configured. In the ifcfg-bond1 file if i have the primary as eth8, and i ifdown eth8 then the bond1 ip stops pinging, however if i...
View ArticleRe: Redhat Kickstart OS Image
Simon, MK is absoultely right. It is ongoing process to close the bugs/vulnerability which are reported by security team on the packages are installed. If you need to close them without the help of...
View ArticleRe: storage in root is 100% usage, what to remove to free it
Hamar, Compare the o/p of du -sh / & df -h / ; if there is any deleted files are still open which you can find by the command lsof | grep -i deleted and find top usage directories with command ; du...
View ArticleHow to replace failed drive in RAID 1(1+0) array in HP DL380 G4
Hello experts, I've a HP DL380 G4 which has 4 disks(2x18.2G and 2x72.8G),the OS is Ubuntu 8.04.3 with OpenVZ(has 10 VM running)Following are disks info when I do #cat /proc/driver/cciss/cciss0 cciss0:...
View ArticleRe: How to replace failed drive in RAID 1(1+0) array in HP DL380 G4
To persons who have interest for this topic, what I did yesterday is, pull the failed drive(18.2,15K) and pop in a new one(72.8G 10K) without reboot. Followings are output when do command : #hpacuali...
View ArticleRe: RHEL Bonding mode =1 Question
Hi Simon, Since both interfaces are working when they are primary, it looks to be good at network level.Is that possible to share the bonding options used in your server?Can you try switching the...
View ArticleHp ProLiant Syslog Service
Hi there! i want to ask professional society about Syslog Service. What do i need to configure Syslog Server??? P.S. This thread has been moevd from ProLiant Servers (ML,DL,SL) to Linux > sysadmin....
View ArticleRe: Hp ProLiant Syslog Service
Hi, I think this would fit better in the Linux section of the forum. I'm sure there are many posts about this topic on the Internets :) //Edit: A quick checked showed that there are apparently syslog...
View Article