Re: multipath
Hi MK: Thanks for directing me to the multipathd -k command.From the manual, del path stops monitoring a path, and add path puts back the path to list of monitored paths. There is another pair of...
View ArticleHow to detect HP NIC Model # from Linux OS
HP Advisory: c04258304 lists various NICs by HP model number. All of my systems are RHEL 6. Doing an lspci lists the Broadcom model number. Does anyone know a method to get the HP model number of...
View ArticleRe: How to detect HP NIC Model # from Linux OS
Use "lspci -v" and grep for "Subsystem". Assuming you have a up to date pci-ids file this should show the HP name of the part (but sadly not the part number).By the way there is also the new SPP...
View ArticleRe: How to detect HP NIC Model # from Linux OS
Ah! Great! That works. I was just on the SPP web page yesterday or Monday and saw a Maintenance bundle. I'll go check again. Maybe they released it after I looked. :) Thanks again!
View ArticleI need xorg-x11.tar.gz who can give me to xzby1@sohu.com for nouveau...
I install nouveau need xorg-server macros which require xorg-x11rpm -ivh xorg-x11 then reboot my kyeboard put H is backspacerestore NeoShine5 Linux nowxorg-x11 .el5 8M but not el sys my prog...
View ArticleRe: RH server reboot stop at Non-System disk or disk error
Hi alli've the same problem like Gary but at the 3th step any linux installtion is found(You don't have any linux partitions),when i tried to execute fsck,i've warning message WARNING: Cannot read...
View ArticleCannot install Ubuntu 12.04 or 14.04 on HP 380p gen8
For each of the "certified" Ubuntu disributions, the fatal error is "GRUB cannot be installed"This is an installation on a new, never used system. Have followed the recommended solutions: 1. append...
View ArticleRe: Cannot install Ubuntu 12.04 or 14.04 on HP 380p gen8
THe DL 380p Gen8 doesn't have a "B" series controller, it has a "P" series Smart Array. Ubuntu has inbox drivers for the "P" series Smart Arrays so there whouldn't be any issue there. Do you have a USB...
View ArticleRe: multipath
Hmm... my test VM did not have those commands, but they sound even better for your purpose than using the add/del path commands. Try them... if they work, fine, if not, you can use add/del path...
View Articlehpacucli on Ubuntu 14.04 trusty
Hi, installed Ubuntu 14.04 trusty without issues on a DL360p Gen8. Adding "deb http://downloads.linux.hp.com//SDR/downloads/ManagementComponentPack trusty/current non-free" to the sources.list results...
View ArticleRedhat Kickstart OS Image
Greetings! I wanted to get a list of OS Packages (RHEL) that are safe to install as part of OS image, we get lots of request from apps for some packagaes/tools etc., for apps, also please which may be...
View ArticleRe: Redhat Kickstart OS Image
I don't think there is any software that can be qualified absolutely as "safe".Also, your security concerns may be different depending on your local situation (e.g. a completely stand-alone,...
View ArticleRe: Redhat Kickstart OS Image
Thanks MKI understand the security issue, but this is a complex situation, rpms need root to install and apps cannot install it, so have to depend on SA's. I really wanted to know how different...
View ArticleRe: TO FIND HBA FIRMWARE VERSION SEE BELOW
hi, Try below command #dmesg | grep -i fibre
View ArticleHBA firmware/driver updates
For RHEL6 distributions i understand that the HBA driver and firmware version are dependent on the kernel level, for the Qlogic cards. Is this true for emulex cards too? Is it possible to update the...
View ArticleRe: hpacucli on Ubuntu 14.04 trusty
I've installed http://downloads.linux.hp.com/SDR/downloads/MCP/ubuntu/pool/non-free/hpacucli_9.40.1-1._amd64.deb on our new servers, they have P420i with "Firmware Version: 5.42". I don't get the...
View ArticleDL360P G8 Ubuntu 14.04 P420i raid controller
I have a question about Ubuntu 14.04 install. I booted to the Ubuntu install disk and go through the install process. The installer seems to see the raid arrays and seems to install to the selected...
View ArticleRe: DL360P G8 Ubuntu 14.04 P420i raid controller
Sounds like the VID (Virtual Install Disk) is enable in NVRAM. The VID is read only and will appear to the OS as a disk. Go into RBSU and disable the VID. Advanced Options - Advanced System ROM Options...
View ArticleRe: DL360P G8 Ubuntu 14.04 P420i raid controller
Jimmy Vance wrote:Sounds like the VID (Virtual Install Disk) is enable in NVRAM. The VID is read only and will appear to the OS as a disk. Go into RBSU and disable the VID. Advanced Options - Advanced...
View ArticleRe: DL360P G8 Ubuntu 14.04 P420i raid controller
the original intent was to store boot critical drivers for supported versions of Windows and Linux. The drivers are there (or they were last time I looked), but the VID is turned off by default as it...
View Article