Centos OS Installation
We are trying to install Centos 6.9 on DL20. We Have created Raid and all. But its not showing HDD at the time of installation. can someone help
View ArticleHow to use kudzu to find new disks in RHEL 5
HP BL460c with 8Gbps VC-FC、 HP EVA8000 and RHEL 5.4Can I use kudzu to find new disks/LUNs in RHEL 5, instead of using echo "---" > /sys/class/scsi_host/hostX/scan ?Notes: although I can normally...
View ArticleRe: Centos OS Installation
Hello RakeshChopra,There is no information about server generation and smart array controller details which is installed in this server .Firstly you need to check if your version is supported to this...
View ArticleRe: Centos OS Installation
wrote:We are trying to install Centos 6.9 on DL20. We Have created Raid and all. But its not showing HDD at the time of installation. can someone helpWhat generation is the DL20, and which RAID...
View ArticleRe: How to use kudzu to find new disks in RHEL 5
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/5/html/5.6_technical_notes/kudzuPlease check with redhat team
View ArticleRe: How to use kudzu to find new disks in RHEL 5
Thanks！ And I review the above link for the kudzu bug fix. But it just contains the two bugs:: sound card and net MAC！So I think this should have nothing to do with adding new disks！
View ArticleDL 380 Gen 10 Server Boot With 4.4.176 Kernel
The DL 380 Gen 10 servers hang when booting Linux (CentOS) 4.4.17x kernel. They boot the 5.0.x kernel just fine but not the 4.4 kernel. Anyone had this issue? Any resolution for this?
View ArticleRe: DL 380 Gen 10 Server Boot With 4.4.176 Kernel
wrote:The DL 380 Gen 10 servers hang when booting Linux (CentOS) 4.4.17x kernel. They boot the 5.0.x kernel just fine but not the 4.4 kernel. Anyone had this issue? Any resolution for this?What...
View ArticleRe: DL 380 Gen 10 Server Boot With 4.4.176 Kernel
This is for CentOS 7. We have two 10 Gb adapters and 2 Fibre Channel adapters (Qlogic 16 Gb).
View ArticleRe: DL 380 Gen 10 Server Boot With 4.4.176 Kernel
wrote:This is for CentOS 7. We have two 10 Gb adapters and 2 Fibre Channel adapters (Qlogic 16 Gb).Again, what error(s) are you seeing. I was referencing SLES to state 4.x kernels work on the...
View ArticleRe: DL 380 Gen 10 Server Boot With 4.4.176 Kernel
I am not sure of the error. It just drops to the dracut shell and cannot be ressurected. Unfortunately, I don't have a test server and all of the servers are being used at the current time, so I...
View ArticleHpssacli RAID10 to Raid1
Hi,I made a mistake, I have added 2 new disk to rhe worng ld, It had transformed the ld1 in Raid 10. Now I try to remove the disks from Array A to assigned them to Array B, but it doesnt work.Let me...
View ArticleRe: Hpssacli RAID10 to Raid1
Hello ,It is theoritically possible to split RAID 1+0 to RAID 1.However, it cannot be done in Online Mode. You would have to reboot the server and boot to the HPSSA in offline mode and then you will...
View ArticleRe: How to Backup a Partition, put it in a new partition, and then make it...
You'd be looking at grub instead of lilo.The configuration is likely to be in /boot/grub, named grub.cfg, grub.conf or menu.lst.Here's a link to an example of a multi-boot configuration.
View ArticleRe: HPE SN1100Q 16Gb 2p FC HBA
Did you solve this? I have the same issue... still looking arround the web to fix it...
View ArticleRe: DL 380 G5 - RHEL OS Supported Version
Hi,Can I install windows server 2019 to DL 380 G5 - server?with Hyper-v to set up DC/AD and WSUS server...
View ArticleRe: pvcreate error: can't open /dev/sdb1 exclusively. mounted filesystem?
Thanks, it worked for me. Thanks a lot.
View Articleilorest tool on centos/rhel 7.6 - Chif driver not found, please check that...
Dear All,I have two problems with this tool.i am using ilorest 2.4 on centos 7.6 at first, it was working fine to save bios setting with :ilorest save --selector=Bios. -f settings.jsonand loading them...
View ArticleRe: ilorest tool on centos/rhel 7.6 - Chif driver not found, please check...
A. First kindly check the RHEL & CentOS supported versions for the Proliant Server in use as per Proliant OS Matrix to identify if the CenOS/RHEL 7.6 is even supported for that Proliant Server or...
View ArticleNeed help with entry to old-style ip6tables 2011 Linux
Problem: I have a czech BOT trying to break into my system.I'm running an old version of Linux and need the format to block his IP.Here's what the ip6table entries look like:root% cat ip6tables#...
View Article