no acceptable C compiler found in $PATH
I am trying to install Wireshark in Kubuntu,When I type ./configureI get the following errors "no acceptable C compiler found in $PATH"What is the fix? root@amd-ThinkCentre-M93p:/home/amd# cd...
View ArticleRe: no acceptable C compiler found in $PATH
> I get the following errors "no acceptable C compiler found in $PATH"> What is the fix? The usual fix might be to install a C compiler.> checking for gcc... no GCC would seem to be what...
View ArticleRe: no acceptable C compiler found in $PATH
Install gcc, or better yet use apt to install the wireshark binary compiled for your system unless you have a specific need to install from source
View ArticleRe: no acceptable C compiler found in $PATH
How do I make it so the GCC main executable is in my path?Your help much appreciated.
View ArticleRe: no acceptable C compiler found in $PATH
> How do I make it so the GCC main executable is in my path? _If_ you have installed GCC, then I'd expect it to be in some commonplace (like,say, "/usr/bin", "/usr/local/bin", ...), so you...
View ArticleCentos 7 install issue with HP ProLiant DL380p Gen8
Some relevant info8 x 1 TB drives in a raid 5 (hardware raid)This system currenlty works on Centos 6.4 and has the OS installedHowever when trying to setup a new install using Centos 7, apparenlty...
View ArticleRe: Centos 7 install issue with HP ProLiant DL380p Gen8
On Gen8 servers, there is no 'Legacy boot mode' as the system firmware is BIOS and not UEFI.How many logical drives were defined on the system when running CentOS 6.4? Most OS's using MBR (BIOS) drive...
View ArticleRe: Centos 7 install issue with HP ProLiant DL380p Gen8
Yes I think that may be part of the issue, however as far as I can tell whoever installed CentOS 6 on here set it up with 1 array using all 8 x 1 TB drives, so based on what I see in the bios therre is...
View ArticleSSD not detected by Ubuntu Installer
I have recently bought a new HP laptop with pre-installed Windows 10. ModelNo. HP Pavilion x360 cd0056txI created an UEFI enabled USB bootable of Ubuntu 18.04. I booted using my USB drive. Then in the...
View ArticleRe: SSD not detected by Ubuntu Installer
This is the wrong company and wrong community forums for laptop questions. You need to use the HP Inc forums https://support.hp.com/us-en/products/.This forum is for Hewlett Packard Enterprise...
View Articlemsa 2050 active/active setup on RHEL 6
Hello,I try to use my 2050 with 4 paths connected to the host as active/active array (2 dual-port HBA) . I use the Linux own dm-multipath solution, but it seems that whatever I do, it's running as...
View ArticleRe: msa 2050 active/active setup on RHEL 6
Not exactly sure about your configuration, but keep in mind the MSA works with ALUA, this means the server always talks to the owner controller of a LUN, not to the "non-optimized" partner "standby"...
View ArticleInstallation of debian 9 on DL20 Gen9
Hi,I have installed debian 9.3 on DL20 Gen9, in legacy mode i have changed the controler to AHCI SATA mode. When Debian 9.3 start, what happen is that the screen of the system appear like on the...
View ArticleRe: Installation of debian 9 on DL20 Gen9
No need to use legacy mode, just set the controller to SATA AHCI in default UEFI. The image looks like the kernel is setting a video mode that the monitor isn't happy with. switch over to tty2 which...
View ArticleRe: Installation of debian 9 on DL20 Gen9
yes i have the console. how to adjust the display modes?
View ArticleRe: Installation of debian 9 on DL20 Gen9
you can try using 'nomodeset' on the boot line to stop KMS. You will need to try various resolution options to find something your monitor is happy with. A quick google search returned this...
View ArticleRe: Installation of debian 9 on DL20 Gen9
I used nomodeset on the boot and it is working now. thank you
View ArticleNot able to ping the default subnet
I can't ping the default gtw 10.15.224.1 or anything else except 10.15.224.8. Please let me know what am I missing. Thanks!HP-2530-48G with config:no stackip default-gateway 10.15.224.1interface 48...
View ArticleHPE ProLiant DL360 Gen10 utilizing each socket for different purpose without...
I have two HPE ProLiant DL360 Gen10 Server 2 SocketsWe need to utilize each servers for running:One instance of Oracle standard edition on Linux on one socket.Utilize the other socket for hosting web...
View ArticleRe: HPE ProLiant DL360 Gen10 utilizing each socket for different purpose...
How do you want to run windows and linux at the same time without virtualization?
View Article