Re: during booting kernel panic
You might still be able to fix this, by re-installing a minimal configuration of the RHEL 6.3 operating system on top of the existing installation.If you do this, you must not let the installer...
View ArticleRe: Kernel panic - not syncing : Attempted to kill init !
This means GRUB has successfully loaded your kernel and initrd. LVM seems to be OK, but it looks like your root filesystem cannot be found for some reason. RHEL 4 used the driver disk images...
View Articlels: cannot access /sys/bus/scsi/devices/1:0:1:0/: No such file or directory
running redhat linux 6 on HP ProLian and with Smart Array P410 contorller. I am running the controller utility hpacucli, but got the following error at beginning.# hpacucli ctrl all show configls:...
View ArticleRe: ls: cannot access /sys/bus/scsi/devices/1:0:1:0/: No such file or directory
All the files in /sys are virtual constructs, based on the kernel data structures.You may have some storage devices that used to be accessible through the /sys/class/scsi_host/host1 storage controller,...
View ArticleConstant File System Corruption
Hello, I have a DL380 G4 with 4gb Ram, and 6 146gb Seagate Cheetah 10k Drives in a RAID 5 configuration using the Integrated Smart Array 6i Controller, and am using Ubuntu 12.04 (x86_64) OS. I've been...
View ArticleRe: Kernel panic - not syncing : Attempted to kill init !
HI, After installing the drivers now i can able to see the logical disk in /dev/cciss/* and /proc/partitions. If the rescue mode works with the driver disk and the partitions/logical volumes get...
View ArticleRe: Kernel panic - not syncing : Attempted to kill init !
>...each Kernel file (vmlinuz-2.6.9-67.0.20.EL) have corresponding initrdfile ( initrd-2.6.9-67.0.20.EL.img)(The vmlinuz-2.6.9-67.0.20.EL is a single-processor kernel. Proliant DL360 G5 has either...
View ArticleRe: Kernel panic - not syncing : Attempted to kill init !
Thank you so much MK. let me check wheather we can upgrade or not. in rescue mode "chroot /mnt/sysimage" was not working its giving " cannot run command '/bin/sh': input/output error". now i'm in...
View ArticleRe: Kernel panic - not syncing : Attempted to kill init !
Apparently there is some corruption in your root filesystem after all. You can use the rescue mode without entering the "chroot /mnt/sysimage" command too, but then you will have a reduced set of...
View ArticleSame Local user and LDAP user conflict in RHEL 6.4
Hi All, There is one RHEL 6.4 server called "serverA". It is integrated with LDAP. There is one user "abc" created locally on /etc/passwd o the server "serverA". but unfortunately the same user "abc"...
View ArticleSegmentation fault on installation of PSP
Hi, I'm trying to install the latest PSP to a Linux Server after updating to RHEL 6.4. I get a segmentation fault. I already had that on other systems, and it resulted because of low space in /boot,...
View ArticleC Question: char messagebuf[8199999]
Hello Folks; I know this isn't exactly an admin question - but I know someone can easily answer it. I wrote a simple "grim reaper" program to go through the /var/log/message fileand remove all the...
View ArticleRe: C Question: char messagebuf[8199999]
Hello Steven; Thanx for your help, Steven. I set the "static char messagebuf[10000000] and it compiled and ran fine. regards,tonyp
View ArticleRe: C Question: char messagebuf[8199999]
>I increase the value of messagebuf past 8MB, I get a segmentation fault when I execute it regardless of the size of the input file. Based on Steven's comments about stack size, if the stack grows...
View ArticleNeed to create the report using the script
Hi All, We have lot servers installed with Veritas Storage foundation products. If I enter following command it is showing all the veritas product installed and license details. Symantec License...
View ArticleRe: Need to create the report using the script
Perhaps something like:awk -v server=ServerA 'BEGIN { serial = "---" license_key = "---" platform = "---" version = "---"}/Product Name/ { product = $4 for (i = 5; I < NF; ++i) product =...
View ArticleRsyslog remote logging via tcp not working - plz help
I have a "central syslog server" that listens on udp 1514 and tcp 1468 All SUSE Linux Servers are sending their logs to "central syslog server" via tcp(1468). SUSE servers uses'syslog-ng', with...
View ArticleLinux UDEV for ASM oracle database
I would like to know exactly how to configure udev to disk from SAM multipath and connect to oracle ASM for linux 5.9 and Linux 6.4 I saw that in the script are placed parameters such as ENV {DM_NAME}...
View ArticleRe: Rsyslog remote logging via tcp not working - plz help
quite strange if I configure the box to send logs via tcp, merely running "/etc/init.d/rsyslog start" does not work for me. But running rsyslog in foreground and debug mode via following command...
View Article